2SafetyPrecautionsBefore operating theunit, please read thefollowing safetyprecautions carefully.3WarningsCAUTION!TO PREVENT FIRE OR SHOCK HAZARD,DO NOT EXPOSE THE UNIT TO RAIN ORMOISTURE. TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOT REMOVE SIDEOR BACK PANELS. NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL.n Operate the unit only on 120 VAC, 50 or 60 Hz.For printers that have been shipped outside ofthe United States and Canada, the proper voltagetransformer (100 VAC or 220/250 VAC) and plugshould be furnished with the unit. If you haveany doubt as to whether you have the correctpower transformer and plug for your country’spower supply, DO NOT ATTEMPT TO USETHE UNIT. Refer to Section 5 of this manual orcontact your dealer or the factory.n Stop operation immediately if any liquid or solidobject should fall into the cabinet. Unplug theunit and have it checked by qualified servicepersonnel.n Unplug the unit’s power transformer from thewall outlet if you do not use the unit for a longtime. Disconnect the cord by grasping the plug.Never pull the cord itself.n The unit is not disconnected from the mainpower source as long as the power transformer isplugged into the wall outlet, even if the unit itselfhas been turned off.n Do not disassemble the cabinet. Refer servicingonly to qualified personnel.
