59Printer Preferences (sys:Prefs/Printer)Use the Prefs/Printer program to select“PrimeraPro” as the current printer and set theother gadgets as described below. OtherPrimeraPro files may be visible on the list butshould not be selected.Printer Type: PrimeraProPrinter Port: ParallelPaper Type: SinglePaper Format: U.S. Letter = A (8.5” x 11”).U.S. Legal = A-Long (A-sizewith tabs).Narrow Tractor = A4(210mm x 297mm).Wide Tractor = A4-Long(A4-size with tabs).Other options are reservedand should not be used!Note: Use PPCI interface forpaper size selection.The other gadget settings do not affect PrimeraPrographics printing and should be left as is for textprinting.For more information about the printable area foreach paper size refer to page 24 of this manual. Thiswill help you determine which paper size to use foryour printing needs.Graphics Printer Preferences(sys:Prefs/PrinterGfx)Use the Prefs/PrinterGfx program to set thegraphics printing parameters. The settings beloware most common when printing to the PrimeraPro,although they are not required to be set as shown.Different applications may use or allow changes tothese settings at print time. If a setting such asDensity (or Resolution for some applications) is notseen within the application’s print box, you mayassume that it is using the Prefs setting. Prefssettings must be saved prior to entering theapplication’s print box.C. UsingPrimeraPro’sPreferencesPrinter Driver
