FabIATech Corporation34
Remote Access ConfigurationThis option turns on remote access support in the BIOS and is the default setting.The remote access feature requires the use of the serial port1 connector located atthe front panel of the FR9100. Remote AccessThis field is select remote access type.Available Options: Enabled and DisableDefault setting: Enabled Serial Port numberThis field is the Serial port1 for console redirection. Make sure the port is Enabled.Available Options: COM1Default setting: COM1 Base Address, IRQThis field is the I/O port address and Interrupt.Available Options: 3F8, 4Default setting: 3F8, 4
