FabIATech Corporation55AHCI & RAID DriverWindows XP-SP3/S2003/S2008/7-X32/X64 AHCI&RAID Driver1 To install the RAID utility OR AHCI driver, insert the CD ROM into the CDROM device, and enter DRIVER>IDE>RST. If your system is not equippedwith a CD ROM device, copy the AHCI&RAID driver from the CD ROM toCF.2 Execute IATA_CD.EXEBIOS Flash UtilityIn the directory, there is the AFU409.EXE file.Step 1: Use the AFU438.EXE program to update the BIOS setting.Step 2: And then refer to the chapter “BIOS Setup”, as the steps to modify BIOS.Step 3: Now the CPU board’s BIOS loaded with are the newest program; user canuse it to modify BIOS function in the future, when the BIOS add somefunctions.Note: 1. If your install Windows XP is early version (SP1/SP2), copy the AHCI driverfrom the CD ROM to Floppy Disk and insert to USB floppy device. In the IDE >AHCI AHCI>F6_RST directory, a README.TXT is included to provide installationand setup RAID Option ROM information.2. When BIOS CMOS setting SATA as AHCI or RAID mode, need the install theAHCI & RAID device driver.
