FabIATech Corporation41
Boot Setting Configuration Quick BootThis field is used to activate the quick boot function of the system. When set toEnabled,1. BIOS will not wait for up to 40 seconds if a Ready signal is not received from theIDE drive, and will not configure its drive.2. BIOS will not wait for 0.5 seconds after sending a RESET signal to the IDE drive.3. You cannot run BIOS Setup at system boot since there is no delay for the Hit, Del.To run Setup message.Available Options: Disabled, EnabledDefault setting: Enabled Boot Up Num-LockThis field is used to activate the Num Lock function upon system boot. If the settingis on, after a boot, the Num Lock light is lit, and user can use the number key.Available Options: On, Off
