Falcon Elan 110 Dual Fuel User Manual

Also see for Elan 110 Dual Fuel: User guide & installation & service instructions User's guide & installation instructions

Falcon Elan 110 Dual Fuel User Manual Manual pdf 33 page image

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSONDisconnect from electricity and gas before servicing. Check appliance is safe when you have finished.31Set the GovernorUnscrew the governor’s brass top. In the base of the brass topis a plastic snap-in converter device (Fig.8-4). To convert thegovernor, snap the device out of the top and refit it the otherway round. The snap-in converter device is marked to showthe gas for which it is set (Fig.8-5).Make sure the device is secure in the top cap and refit the capto the governor.Affix LabelStick the appropriate gas label over the natural gas part of theappliance data label. Ensure that the appliance is gas sound (refer to‘Pressure Testing’ in the ‘Installation’ section). Check the operation of all the burners.ArtNo.102-0007 - Maxitrol converter device positionsFig.8-5ArtNo.103-0006 - Maxitrol cap & converter�� Fig.8-4