Falcon Elan User Manual

Falcon Elan User Manual Manual pdf 21 page image

21InstallationDear InstallerBefore you start your installation, please completethe details on the previous sheet. This is so that,if your customer has a problem relating to yourinstallation, they will be able to contact you easily.You must be aware of the followingsafety requirements & regulationsThe cooker must be installed in a well-ventilatedspace, as specified in:‘AS 5601/AG 601 - Gas Installations’.The installation must also be in accordance withall local gas fitting regulations, municipal buildingcodes, electrical wiring regulations and any otherrelevant statutory regulations.In your own interests and those of safety, it is lawthat all gas appliances be installed by an authorisedperson. Failure to install the appliance correctlycould invalidate any warranty or liability claims andlead to prosecution.Before installation, ensure that the cooker issuitable for your gas type and supply voltage. Seethe data badge. This appliance can be converted foruse on Propane.Warning: where this appliance is installed inmarine craft or in caravans, it shall not be usedas a space heater.This appliance is designed for domestic cookingonly. Use for any other purpose could invalidateany warranty or liability claim.Ventilation RequirementsThe room containing the appliance should have anadequate air supply.An appliance should be installed in a location forcomplete combustion of gas, proper flueing and tomaintain ambient temperature of the immediatesurrounding at safe limits, under normal operationcondition.Failure to install appliances correctly isdangerous and could lead to prosecution.Location of CookerThe cooker may be installed in a kitchen/kitchendiner but NOT in a room containing a bath orshower.ConversionAll models are supplied by default for use withnatural gas. A conversion kit for use with Propaneis included with the appliance. See the instructionsthat are supplied with the conversion kit, andincluded in these instructions.After converting the appliance, please attach theGas Conversion sticker over the appropriate areaof the data badge. This will identify the gas type forwhich the appliance is now set.You will need the following equipment tocomplete the cooker installation satisfactorily:GAS PRESSURE TESTERFLEXIBLE GAS HOSEMust be in accordance withthe relevant standards.MULTIMETER(for electrical checks)You will also need the following tools:1. Electric drill2. Masonry drill bit(only required if fitting the cooker on astone or concrete floor)3. Rawlplugs(only required if fitting the cooker on astone or concrete floor)4. Screws for fitting stability bracket5. Pencil6. Steel tape measure7. Cross head screwdriver8. Flat head screwdriver9. 4mm & 3mm Allen keys10. Spirit level11. Adjustable spannerAustraliaINSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.