Falcon Elan User Manual

Falcon Elan User Manual Manual pdf 25 page image

25AustraliaINSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.Fit the plastic blanking plugs to the fixing holes.Remove the 4mm Allen screws from the top corners ofthe fascia and fix the front handrail in position.Fitting the SplashbackThe cooker can be installed with or without thesupplied splashback. To fit the splashback, remove thetwo fixing screws (3mm hexagonal socket head) andnuts that pass through the top of the rear flue grille.Hold the splashback in position. From the rear, refit thetwo fixing screws and nuts.Fitting the Stability BracketThe stability bracket supplied with the cooker must befitted. Read the leaflet supplied with the bracket, and fitit as follows:1. Place the cooker in its intended position and level thecooker.2. Draw a pencil line 70mm from the front edge of thelevelling feet.3. Mark the centre line for the bracket by measuring550mm from the left hand side of the cooker.4. Move the cooker forward.5. Measure back from the pencil line 500mm to locatethe front edge of the bracket. Position the bracket sothat it is away from centreline of the cooker to reducethe possibility that it will trap the electrical connectioncable or gas hose. Fix the bracket to the floor.6. Measure the height from floor level to the engagementedge at the rear of the cooker. Add 3mm to thisdimension and assemble the stability bracket to thisheight (i.e. from floor level to the underside of the topmember), and ensure the bracket does not foul theoven burner assembly: