Falcon toledo User Manual

Also see for Classic: User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions User's guide & installation instructions

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSONDisconnect from electricity before servicing. Check appliance is safe when you have finished.323 Controls3.1. To Replace the Ignition or Light SwitchDISCONNECT FROM THE ELECTRICITY SUPPLY.Remove the control panel (see 1.1).Note: The old switch may be destroyed during removal.Remove the old switch from its bezel by gripping theswitch body behind the control panel and twistingsharply. Remove the switch bezel by folding back thelocking wings and pushing forward.To fit the new bezel to the control panel: first line up theraised key on its body with the cut-out in the controlpanel and push it in from the front.Assemble the new switch to the bezel by lining up thekey sections and pushing home. Fit the new button bypushing in from the front.Replace the control panel in the reverse order and testfor correct operation.3.2 To Replace the ClockDISCONNECT FROM THE ELECTRICITY SUPPLY.Remove the control panel (see 1.1). Pull off the timercontrol buttons.Undo the timer fixing screws and remove the timer/mounting bracket assembly from the control panel.Remove the timer from its mounting bracket bydepressing the plastic lugs on the timer case, and at thesame time pulling the unit forward.Reassemble in the reverse order. When replacing theleads, refer to the wiring diagram. Check the operationof the timer.3.3 To Change the Ignition GeneratorDISCONNECT FROM THE ELECTRICITY SUPPLY.Pull the cooker forwards to gain access to the cover boxat the rear of the cooker. Remove the screws securingthe cover and lift clear. Noting the position of the leads,pull off all the leads to the generator. Slacken the 2screws holding generator to cooker and remove thegenerator.Fit the new generator to the cooker and replace theleads. Refer to the wiring diagram and reassemble in thereverse order. Check the ignition performance.Spring clipGrill injector holderFig.9-4