GE 18 Use And Care & Installation Manual

Also see for SIDE-BY-SIDE REFRIRATOR 22: Owners and installation manual Owner's manual Use and care & installation guide Owner's manual Use and care & installation guide

GE 18 Use And Care & Installation Manual Manual pdf 12 page image

ICE DISPENSER(on some models)12How the Ice Dispenser WorksWhen the selector switch is set at ICE CUBES…(1) The automatic icemaker fills the(2) ice storage bin.(3) Pushing on the ice cradle activates the(4) motor-powered auger which moves the icecubes into glass through the(5) chute.When the selector switch is moved to CRUSHEDICE, a flipper directs the cubes through the(6) crusher and crushed ice falls through the chute.Spills are caught in the(7) spill shelf.CAUTION: Never put fingers or any other objects into the icecrusher discharge opening.1237564Before Using Your Icemaker and Dispenser Once Your Icemaker is in OperationIf your refrigerator is operated before the waterconnection is made, remove the ice storage binand make sure the icemaker feeler arm is in theSTOP (up) position.When the refrigerator has been connectedto the water supply, move the feeler arm to theON (down) position.The icemaker will fill with water when it cools tofreezing. A newly-installed refrigerator may take8 to 12 hours to begin making ice cubes.When the water supply has beenconnected to the icemaker, remove theice storage bin, move the icemaker feelerarm to the ON (down) position, andreplace the bin.To remove the ice storage bin, lift thefront of the bin and pull the bin straightout while supporting it at front and rear.To replace the ice storage bin: Slide itback on the ice bin shelf. If the bin doesnot go all the way back, remove it and rotatethe drive mechanism 1/4 turn. Then push thebin back again.RotateDriveMechanismFeatures vary by modelA newly-installed refrigerator may take8 to 12 hours to begin making ice.