GE 18 Use And Care & Installation Manual

Also see for SIDE-BY-SIDE REFRIRATOR 22: Owners and installation manual Owner's manual Use and care & installation guide Owner's manual Use and care & installation guide

GE 18 Use And Care & Installation Manual Manual pdf 17 page image

REFRIGERATOR LOCATION17Do not install the refrigerator where the temperature will gobelow 60°F. (16°C.) because it will not run often enough to maintainproper temperatures.Do install it on a floor strong enough to support it fully loaded.To keep energy costs down, avoid locating the refrigerator next to therange or a heating vent.Care and Cleaning Location Clearances RollersCLEARANCESAllow the following clearances for ease of installation, proper aircirculation and plumbing and electrical connections:Sides ..........................................................................3/4″ (19 mm)Top.............................................................................1″ (25 mm)Back...........................................................................1″ (25 mm)If Model 19, 22, or 25 is to be installed against a wall on the hinge side,allow 11⁄2″ (44 mm) for door clearance.ROLLERS(on some models)The rollers have three purposes:1. Rollers can be adjusted so the door closes easily when opened abouthalfway. (Raise the front about 3/4″ (19 mm) from the floor.)2. Rollers should be adjusted so the refrigerator is firmly positioned onthe floor and does not wobble.3. Rollers allow you to move the refrigerator away from the wall forcleaning.To adjust the rollers:1. Remove the base grille bygrasping the bottom of thegrille and pulling it out.2. Turn the two front rolleradjusting screws clockwiseto raise the refrigerator,counterclockwise to lower it.3. To replace the base grille,line up the clips on the backof the grille with the openingsin the base plate and pushthe grille forward until itsnaps into place.