GE 18 Use And Care & Installation Manual

Also see for SIDE-BY-SIDE REFRIRATOR 22: Owners and installation manual Owner's manual Use and care & installation guide Owner's manual Use and care & installation guide

GE 18 Use And Care & Installation Manual Manual pdf 8 page image

SHELVESHow to Rearrange Your Shelves (on some models)8Shelves in the fresh foodand freezer compartmentsare adjustable.To remove shelves: Tilt theshelf up at front, then lift itup and out of tracks on therear wall of the refrigerator.To replace shelves: Select thedesired shelf height. With shelffront raised slightly, engage tophooks in tracks at rear of cabinet.Then lower front of shelf until itlocks into position.Wire shelves (on some models)are adjustable in the same manner.2Lift up and out1Tilt upEngagetop hookLower to lockinto place12Removable Wine Rack (on some models) Extra Freezer Shelf (on some models)The wine rack is designed to holda bottle on its side.Some models have an extrafreezer shelf that allows youto use the freezer spacemore efficiently.Porta-Bins on the Doors (on some models) Snuggers (on some models)Adjustable Porta-Bins on freshfood and freezer compartment doors caneasily be carried from the refrigerator tothe work area.To remove: Slide Porta-Bin forward onmolded supports until it comes completelyout of the door.To relocate: Select desired shelf height,engage Porta-Bins in the molded supportsof the door, and slide in. Porta-Bin will hook in place.Snuggers are designedto give you storage flexibilityin Porta-Bins and on your freshfood door shelves.Place index finger and middlefinger on either side of thesnugger near the front andsimply move it back and forthto fit your needs.SnuggerTwo-Position Freezer Shelf (on some models)To relocate the two-position freezer shelf, lift slightly and move itsideways to free the ends of the shelf from the holes in the walls.Then tilt the shelf and take it out. To reinstall the shelf, first insertone end and then the other.For models with an icemaker,the shelf must be placed inthe lower position.For models without anicemaker, the shelf can beplaced in either position.Features vary by model