GE 239 Instruction Manual

Also see for 239: Instruction manual

GE Multilin239 Motor Protection Relay6-96 239PC SOFTWARE 6 239PC SOFTWARE66.7 239 FIRMWARE UPGRADEa) STEP 1—SAVING AND PRINTING SETPOINTS1. Save the 239 setpoints to a file by selecting Save As from the File menu.2. 239PC will prompt for a file name and location. Choose an appropriate file name and directorythen click OK to continue saving the setpoints.3. Select Print Setup from the File menu.4. The Print Setup dialog box (shown below) will appear. Select the desired information to be printed,in this case Setpoints (All), and then click OK.5. Select Print from the File menu.6. Ensure the printer selected is setup and on-line and click OK to print setpoints.b) STEP 2—LOADING NEW FIRMWARE INTO THE 2391. Select Upgrade Firmware from the Communication menu.2. The following window will appear. Select Yes to proceed or No to abort the process.3. The file to be loaded into the 239 must match the hardware inside the 239.•If the 239 serial number begins with B or C, select the file beginning with the characters 64C.•If the 239 serial number begins with D, select the file beginning with the characters 64D.