GE AF-650 GP Quick Installation Manual
Also see for AF-600 FP Series: Quick guideOperating instructionsDesign and installation guideOperating instructionsOperating instructions
                                                      | |
Contents
|
Par. EN-03, Default Gateway is optional and only used in routed networks.Par. EN-06, Name ServersPar. EN-07, Domain NamePar. EN-08, Host NameAre used with Domain Name Server systems and are all optional. If DHCP or BOOTP is selected as IP address assignment, these parameters are read only.NB!It is only possible to assign valid class A, B and C IP address to the option. The valid ranges are shown in the below table:Class A 1.0.0.1 - 126.255.255.254Class B 128.1.0.1 - 191.255.255.254Class C 192.0.1.1 - 223.255.254.2544.1.2 Ethernet Link ParametersParameter group EN-1# holds information Ethernet Link information:EN-10 Link StatusEN-11 Link DurationEN-12 Auto NegotiationEN-13 Link SpeedEN-14 Link DuplexPlease note the Ethernet Link Parameters are unique per port.Par. EN-10, Link Status and par. EN-11, Link Duration displays information on the link status, per port.Par. EN-10, Link Status will display Link or No Link according to the status of the present port.Par. EN-11, Link Duration will display the duration of the link on the present port. If the link is broken the counter will be reset.Par. EN-12, Auto Negotiation – is a feature that enables two connected Ethernet devices to choose common transmission parameters, such as speed and duplexmode. In this process, the connected devices first share their capabilities as for these parameters and then choose the fastest transmission mode they bothsupport.By default this function is enabled.Incapability between the connected devices, may lead to decreased communication performance.To prevent this, Auto Negotiation can be disabled.If par. EN-12 is set to OFF, link speed and duplex mode can be configured manually in par. EN-13 and EN-14.Par. EN-12, Link Speed – displays/sets the link speed per port. “None” is displayed if no link is present.Par. EN-14, Link Duplex – displays/sets the duplex mode per port.Half-duplex provides communication in both directions, but only in one direction at a time (not simultaneously).Full-duplex allows communication in both directions, and unlike half-duplex, allows for this to happen simultaneously.Modbus TCP164 |
Related manuals for GE AF-600 FP Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine