GE AF-650 GP Quick Installation Manual
Also see for AF-600 FP Series: Quick guideOperating instructionsDesign and installation guideOperating instructionsOperating instructions
                                                      | |
Contents
|
EN-13 Link SpeedOption: Function:Forces the link speed for each port in 10 or 100 Mbps. If par. EN-12 is set to: ON, this parameter is readonly and displays the actual link speed. “None” is displayed if no link is present.[0] * None[1] 10 Mbps[2] 100 MbpsEN-14 Link DuplexOption: Function:Forces the duplex for each port to Full or Half duplex. If par. EN-12 is set to: ON, this parameter is readonly.[0] Half duplex[1] * Full duplexEN-21 Process Data Config WriteRange: Function:[[0 - 9] PCD read 0 - 9] Configuration of readable process data.NB!For configuration of 2-word (32-bit) parameter read/write, use 2 consecutive arrays in par. EN-21 and EN-22.EN-22 Process Data Config ReadRange: Function:[[0 - 9] PCD read 0 - 9] Configuration of readable process data.EN-28 Store Data ValuesOption: Function:This parameter activates a function that stores all parameter values in the non-volatile memory (EEPROM)thus retaining parameter values at power-down.The parameter returns to “Off”.[0] * Off The store function is inactive.[1] Store All set-ups All parameter value will be stored in the non-volatile memory, in all four setups.EN-29 Store AlwaysOption: Function:Activates function that will always store received parameter data in non-volatile memory (EEPROM).[0] * Off[1] OnModbus TCP396 |
Related manuals for GE AF-600 FP Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine