GE AF-650 GP Quick Installation Manual
Also see for AF-600 FP Series: Quick guideOperating instructionsDesign and installation guideOperating instructionsOperating instructions
                                                      | |
Contents
|
EN-04 DHCP ServerRange: Function:[000.000.000.000 – 255.255.255.255] Read only. Displays the IP address of the found DHCP or BOOTP server.NB!A power-cycle is necessary after setting the IP parameters manually.EN-05 Lease ExpiresRange: Function:[dd:hh:mm:ss] Read only. Displays the lease-time left for the current DHCP-assigned IP address.EN-06 Name ServersOption: Function:IP addresses of Domain Name Servers. Can be automatically assigned when using DHCP.[0] Primary DNS[1] Secondary DNSEN-07 Domain NameRange: Function:Blank [0-19 characters] Domain name of the attached network. Can be automatically assigned when using DHCP.EN-08 Host NameRange: Function:Blank [0-19 characters] Logical (given) name of option.EN-09 Physical AddressRange: Function:[00:1B:08:00:00:00 – 00:1B:08:FF:FF:FF]Read only Displays the Physical (MAC) address of the option.EN-1# Ethernet Link ParametersOption: Function:Applies for whole parameter group.[0] Port 1[1] Port 2EN-10 Link StatusOption: Function:Read only. Displays the link status of the Ethernet ports.[0] No link[1] LinkEN-11 Link DurationOption: Function:Link Duration Port 1 (dd:hh:mm:ss) Read only. Displays the duration of the present link on each port in dd:hh:mm:ss.EN-12 Auto NegotiationOption: Function:Configures Auto Negotiation of Ethernet link parameters, for each port: ON or OFF.[0] Off Link Speed and Link Duplex can be configured in par. EN-13 and EN-14.[1] OnModbus TCP386 |
Related manuals for GE AF-600 FP Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine