1-14 B90 Low Impedance Bus Differential System GE Multilin1.3 ENERVISTA UR SETUP SOFTWARE 1 GETTING STARTED1 Pinging 1.1.1.1 with 32 bytes of data:Destination host unreachable.Destination host unreachable.Destination host unreachable.Destination host unreachable.Ping statistics for 1.1.1.1:Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),Approximate round trip time in milliseconds:Minimum = 0ms, Maximum = 0ms, Average = 0 msPinging 1.1.1.1 with 32 bytes of data:Verify the IP address is programmed in the local PC by entering the ipconfig command in the command window.C:\WINNT>ipconfigWindows 2000 IP ConfigurationEthernet adapter :Connection-specific DNS suffix. . :IP Address. . . . . . . . . . . . : 0.0.0.0Subnet Mask . . . . . . . . . . . : 0.0.0.0Default Gateway . . . . . . . . . :Ethernet adapter Local Area Connection:Connection-specific DNS suffix . :IP Address. . . . . . . . . . . . : 1.1.1.2Subnet Mask . . . . . . . . . . . : 255.0.0.0Default Gateway . . . . . . . . . :C:\WINNT>It may be necessary to restart the laptop for the change in IP address to take effect (Windows 98 or NT).Before using the Quick Connect feature through the Ethernet port, it is necessary to disable any configured proxy settingsin Internet Explorer.1. Start the Internet Explorer software.2. Select the Tools > Internet Options menu item and click on Connections tab.3. Click on the LAN Settings button to open the following window.4. Ensure that the “Use a proxy server for your LAN” box is not checked.If this computer is used to connect to the Internet, re-enable any proxy server settings after the laptop has been discon-nected from the B90 relay.1. Verify that the latest version of the EnerVista UR Setup software is installed (available from the GE enerVista CD oronline from http://www.gedigitalenergy.com/multilin). See the Software Installation section for installation details.2. Start the Internet Explorer software.
