GE CBP400 Owner's Manual

37GEAppliances.caProblem Possible Causes What To DoFood does notbroil properly Improper rack position • See the Broiling guide.being used.Food being cooked in a hot pan. • Use the broiling pan and grid that came with your range.Make sure it is cool.Aluminum foil used on the • See the Using the oven section.broiling pan and grid hasnot been fitted properlyand slit as recommended.In some areas the power • Preheat the broil element for 10 minutes.(voltage) may be low. • Broil for the longest period of time recommendedin the Broiling guide.Control signals after You forgot to enter a bake • Press the BAKE pad and desired temperature or the CLEANentering cooking time temperature or cleaning time. pad and desired clean time.or delay startDisplay flashes "bAd" The installed connection • Contact installer or electrician to correct miswire.then "linE" with a from the house to the unitloud tone is miswired.Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer SupportSurface units donot workThere has been a main powersupply surge and/or a powerinterruption and surge• On the Control Panel, activate the Self Clean mode(press the SELF CLEAN button)• Wait for 30 seconds and then press the OFF button.• The cooktop should now be ready to operateThe words “CLOSEDOOR” flashes orscrolls in the displayThis is a normal condition.The “CLOSE DOOR” is a remindermessage to keep the oven doorclosed during broil mode• This is normal. Keep oven door closed during broil mode