GE Cafe CYE22TSHSS Owner's Manual And Installation Instructions

21TOOLS YOU MAY NEEDInstallation RefrigeratorInstructions GE Café™ modelsQuestions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.comIn Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.caBEFORE YOU BEGINRead these instructions completely and carefully.WARNING Tip Over Hazard.Built-in style models (model PYE, CYE, GYE, PWE,CWE, and ZWE) are top heavy, especially with anydoors open. These models must be secured withthe anti-tip floor bracket to prevent tipping forward,which could result in death or serious injury. Readand follow the entire installation instructions forinstalling the anti-tip floor bracket packed with yourrefrigerator.• IMPORTANT ³ Observe all governing codesand ordinances. Save these instructions for localinspector’s use.• Note to Installer – Be sure to leave these instructions withthe Consumer.• Note to Consumer – Keep these instructions for futurereference.• Skill level – Installation of this appliance requires basicmechanical skills.• Completion time – Refrigerator Installation can varyWater Line Installation 30 minutes• Proper installation is the responsibility of the installer.• Product failure due to improper installation is not coveredunder the Warranty.PREPARATIONMOVING THE REFRIGERATOR INDOORSIf the refrigerator will not fit through a doorway, therefrigerator door and freezer drawer can be removed.• To remove the refrigerator door, see the Installing theRefrigerator section.• To remove the freezer drawer, see the Removing theFreezer Drawer section.WATER SUPPLY TO THE ICE MAKER AND DISPENSERIf the refrigerator has an ice maker, it will have to beconnected to a cold water line. A GE water supplykit (containing tubing, shutoff valve, fittings andinstructions) is available at extra cost from your dealer,by visiting our website at GEAppliances.com (in Canadaat www.GEAppliances.ca) or from Parts and Accessories,800.626.2002 (in Canada 1.800.661.1616).Adjustable Wrench1/4” Outer DiameterCompression Nutand Ferrule (sleeve) Phillips-Head ScrewdriverȒμ Socket Ratchet/Driver1/8”, 3/32”, 1/4” & 5/32”Allen WrenchesPencil1/8” Drill Bit andElectric or Hand DrillTape Measure1/4” Nut DriverPliers LevelFlat-Head ScrewdriverTorx T20, T25