GE D.20 RIO Hardware User Manual

Contents

50 GE Information D.20 RIO - HARDWARE USER’S MANUALCONFIGURATION RESTORATION CHAPTER 5: BACKING UP AND RESTORING THE D.20 RIO9. If the D.20 RIO's's IP configuration needs to be the same as that of the D.20 RIO fromwhich the configuration was copied, then skip this step. Otherwise, at the commandprompt, type d2riocfg and press Enter. Use the menu interface to change the D.20RIO's IP configuration to what it needs to be and then exit back to the commandprompt.10. At the command prompt, type sudo reboot, to reboot the D.20 RIO.11. If the newly restored D.20 RIO configuration is exactly the same as the configurationthat was last retrieved from the D400 Configuration HMI, then skip this step.Otherwise wait for the D.20 RIO to finish rebooting, and then retrieve the D.20 RIOconfiguration from the D400 Configuration HMI.12. Test the D.20 RIO functionality to ensure that the configuration has restored correctly.Result: The D.20 RIO now has the same configuration files as the source D.20 RIO.NOTEAll username and password combinations configured on the destination D.20 RIO will beoverwritten with the values in the saved configuration files.