GE D60 Instruction Manual

Also see for D60: Communications manual Communications guide Instruction manual Instruction manual Instruction manual

Contents

GE Multilin D60 Line Distance Protection System 2-72 PRODUCT DESCRIPTION 2.1 INTRODUCTION22.1.3 REPLACEMENT MODULESReplacement modules can be ordered separately. When ordering a replacement CPU module or faceplate, provide theserial number of your existing unit.Not all replacement modules may be applicable to the D60 relay. Only the modules specified in the order codes areavailable as replacement modules.Replacement module codes are subject to change without notice. See the GE Multilin ordering page athttp://www.gedigitalenergy.com/multilin/order.htm for the latest D60 ordering options.B7 | | | | | | | IEEE 1588 and IEC 61850 and phasor measurement unit (PMU)B8 | | | | | | | IEEE 1588 and phasor measurement unit (PMU) and Breaker-and-a-halfB9 | | | | | | | IEEE 1588 and IEC 61850 and phasor measurement unit (PMU) and Breaker-and-a-half(IEEE1588+Cyber Sentry Lvl 1) D0 | | | | | | | IEEE 1588 and CyberSentry Lvl 1D2 | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850D3 | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850D5 | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850D6 | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and phasor measurement unit (PMU)D7 | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850 and phasor measurement unit (PMU)D8 | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850 and phasor measurement unit (PMU)D9 | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850 + phasor measurement unit (PMU) + Breaker-and-a-halfMOUNT/COATING V | | | | | | Vertical (3/4 rack)B | | | | | | Vertical (3/4 rack) with harsh environmental coatingFACEPLATE/ DISPLAY F | | | | | English displayD | | | | | French displayR | | | | | Russian displayA | | | | | Chinese displayK | | | | | Enhanced front panel with English displayM | | | | | Enhanced front panel with French displayQ | | | | | Enhanced front panel with Russian displayU | | | | | Enhanced front panel with Chinese displayL | | | | | Enhanced front panel with English display and user-programmable pushbuttonsN | | | | | Enhanced front panel with French display and user-programmable pushbuttonsT | | | | | Enhanced front panel with Russian display and user-programmable pushbuttonsV | | | | | Enhanced front panel with Chinese display and user-programmable pushbuttonsPOWER SUPPLY H | | | | 125 / 250 V AC/DC power supplyL | | | | 24 to 48 V (DC only) power supplyPROCESS BUS MODULE | 81 | Eight-port digital process bus moduleDIGITAL INPUTS/OUTPUTS XX XX XX No Module4A 4 Solid-State (no monitoring) MOSFET outputs4B 4 Solid-State (voltage with optional current) MOSFET outputs4C 4 Solid-State (current with optional voltage) MOSFET outputs4D 16 digital inputs with Auto-Burnishing4L 14 Form-A (no monitoring) Latching outputs67 8 Form-A (no monitoring) outputs6A 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs6B 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs6C 8 Form-C outputs6D 16 digital inputs6E 4 Form-C outputs, 8 digital inputs6F 8 Fast Form-C outputs6G 4 Form-A (voltage with optional current) outputs, 8 digital inputs6H 6 Form-A (voltage with optional current) outputs, 4 digital inputs6K 4 Form-C and 4 Fast Form-C outputs6L 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs6M 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs6N 4 Form-A (current with optional voltage) outputs, 8 digital inputs6P 6 Form-A (current with optional voltage) outputs, 4 digital inputs6R 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs6S 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs6T 4 Form-A (no monitoring) outputs, 8 digital inputs6U 6 Form-A (no monitoring) outputs, 4 digital inputs6V 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputsINTER-RELAYCOMMUNICATIONS(select a maximum of 1 per unit)For the last module, slot P is used for digitalinput/output modules; slot R is used for inter-relaycommunications modules.2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode2E Bi-phase, single channel2F Bi-phase, dual channel2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels72 1550 nm, single-mode, LASER, 1 Channel73 1550 nm, single-mode, LASER, 2 Channel74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER75 Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels7A 820 nm, multi-mode, LED, 1 Channel7B 1300 nm, multi-mode, LED, 1 Channel7C 1300 nm, single-mode, ELED, 1 Channel7D 1300 nm, single-mode, LASER, 1 Channel7E Channel 1 - G.703; Channel 2 - 820 nm, multi-mode7F Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED7H 820 nm, multi-mode, LED, 2 Channels7I 1300 nm, multi-mode, LED, 2 Channels7J 1300 nm, single-mode, ELED, 2 Channels7K 1300 nm, single-mode, LASER, 2 Channels7L Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER7R G.703, 1 Channel7S G.703, 2 Channels7T RS422, 1 Channel7W RS422, 2 ChannelsTable 2–6: D60 ORDER CODES FOR REDUCED SIZE VERTICAL UNITS WITH PROCESS BUS (SHEET 2 OF 2)NOTENOTE