GE GBSC0 Technical Service Manual

– 9 –To transfer the center hinge bracket:Using a 5/16-in. socket ratchet/driver, remove1.the bolts securing the center hinge to thecabinet. Set the bolts aside.Transfer the plug button and screw hole cover in2.the hinge holes on the left side to the right side.3. Install the new center hinge bracket from the kiton the left side.To remove the bottom hinge and leveling leg:(Models with freezer door)Using a 1/2-in. socket ratchet/driver, remove the1.nut and hinge pin from the hinge bracket withleveling leg. Using a 5/16-in. socket ratchet/driver, remove the screws from the bottom hingebracket. These will be reinstalled on the otherside.(Continued next page)Remove the button plug from the left side of the4.door. Remove the door thimble from the rightside of the door. Install the door thimble into thehole on the left and the button plug into the holeon the right.Set the door on a non-scratching surface, with5.the inside up.To install the center hinge pin:(Models without freezer door)Install the hinge pin into the new hinge bracket.Bottom HingeBracketUsing a 5/16-in. socket ratchet/driver, remove2.the screws from the leveling leg bracket onthe other side. These will be reinstalled on theopposite side.Leveling LegBracket