GE GLD6500LWW/CC/BB Installation Instructions Manual

Contents

For models equipped with power cord: Do not modify the plugprovided with the appliance; if it will not fit the outlet, have aproper outlet installed by a qualified technician.Cabinet Preparation & Wire Routing• The wiring may enter the opening from either side, rear or thefloor within the shaded area illustrated above in Figure E anddefined in Figure A.• Cut a 1-1/2" maximum diameter hole to admit the electricalcable. Permanent wiring connections may pass through thesame hole as the drain hose and hot water line, if convenient.If cabinet wall is metal, the hole edge must be covered with abushing.NOTE: Power cords with plug must pass through a separatehole.Electrical Connection to DishwasherElectrical connection is on the right front of dishwasher.• For permanent connections the cable must be routed asshown in Figure E. Cable must extend a minimum of 24" fromthe rear wall.• For power cord connections, install a 3-prong groundingtype receptacle in the sink cabinet rear wall, 6" min. or 18"maximum from the opening, 6" to 18" above the floor.FOR PERSONAL SAFETY: Remove housefuse or open circuit breaker beforebeginning installation. Do not use anextension cord or adapter plug with thisappliance.PREPARE ELECTRICAL WIRINGElectrical Requirements• This appliance must be supplied with 120V, 60 Hz., andconnected to an individual properly grounded branch circuit,protected by a 15 or 20 ampere circuit breaker or time delayfuse.• Wiring must be 2 wire with ground and rated for 75°C (176°F).• If the electrical supply does not meet the above requirements,call a licensed electrician before proceeding.Grounding Instructions–Permanent ConnectionThis appliance must be connected to a grounded metal,permanent wiring system, or an equipment groundingconductor must be run with the circuit conductors and beconnected to the equipment grounding terminal or lead onthe appliance.Grounding Instructions–Power Cord ModelsThis appliance must be grounded. In the event of a malfunctionor breakdown, grounding will reduce the risk of electric shockby providing a path of least resistance for electric current.This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug mustbe plugged into an appropriate outlet that is installed andgrounded in accordance with all local codes and ordinances.661Dia56AWhite18"6"24"from Wall3"fromCabinetAlternateReceptacleLocationGroundBlack1-1/2" Dia. Hole (Max.)18"6"ReceptacleLocationAreaFigure EInstallation Preparation#282 FrenchWARNING4#282 FrenchThe improper connection of the equipmentgrounding conductor can result in a riskof electric shock. Check with a qualifiedelectrician or service representative if youare in doubt that the appliance is properlygrounded.WARNING