GE GSD2900 Series Use And Care Manual

Also see for GSD2900 Series: Use and care guide

Contents

If you are redecorating, you can change your dishwasher’s front panels tomatch or blend with your new colors by flipping them over. Each side ofeach panel is a different color. You may also paint a panel with a colorof your own choice.How to Change the Door Panel:1. Take out trim screws on either side of thedishwasher door. Remove the side trim.2. Slide the door panel out.(Careful—edges may be sharp.)3. Turn the door panel around and put the color youwant in front.4. Replace the door panel, side trim and screws.NOTE: Do not operatedishwasher while changingpanels or when lower accesspanel is removed.How to Change the Lower Panel:Retaining 1. Remove the bottom panel attachment screws2. On models without top mounting screws, removeBottom Panel Attachment Screws1the entire access assembly by lifiing it up and overthe retaining tabs.3. On models with top mounting screws, removethe screws.4. Take out the top trim screws and remove thetop trim.5. Slide the color panel(s) up and out and put thecolor you want in front.6. Replace the top trim and screws.7. Replace the entire access assembly by reversingthe steps.Adding 1/4” Wood InsertsColor insert panels for both the door and the lower Dimensions for 1/4” wood inserts:panel can be replaced by 1/4” thick wood inserts to Door Panel: 19%” H x 23%6” W.match your kitchen cabinets. Get them from yournearest cabinet or lumber dealer. Lower Panel: 31X<’ H x 23X(’ W.NOTE: Do not operate dishwasher while changingpanels or when lower access panel is removed.17