GE GSD2900 Series Use And Care Manual

Also see for GSD2900 Series: Use and care guide

Contents

QUESTIONS?USE THIS PROBLEM SOLVERPROBLEMCONTROL PANELLIGHTS GO OFFWHEN YOU’RESETTING CONTROLSDISHWASHERWON’T RUNUNUSUAL NOISEDISHES DON’T DRYUNCLEAN DISHESAND FLATWAREBLACK OR GRAYMARKS ON DISHESDETERGENT LEFTIN DISPENSER CUPSPOSSIBLE CAUSETime too long between touching of selected pads. Each pad must be touched within30 seconds of the others. To relight, touch any pad again, or unlock and relatch door.A fuse in your home maybe blown, or the circuit breaker tripped. Replace fuse orreset circuit breaker. Remove any other appliances from the circuit,Utensils may not be secure on rack pins, or something small may have dropped fromthe rack. Water is causing utensils to rattle. M&e sure everything is securely placedin dishwasher.Water draining out of tub immediately after you touch CLEAR RESET pad. Thesounds you hear are normal ones.Make sure inlet water temperature is correct. (To test, see How to Test WaterTemperature section.) Try the Wash Heat Boost Option.Unload the bottom rack first, Water from dishes in the top rack maybe spillingonto the bottom rack.Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.Check the rinse agent dispenser to see that it’s not empty.Choose another cycle to give you longer washing time.Check inlet water temperature. It should be at least 120°F. (To test, see How toTest Water Temperature section.) Try the Wash Heat Boost Option.Water pressure may be temporarily low, Turn on a faucet. Is water coming out slowerthan usual? If so, wait until pressure is norrnd before using your dishwasher.Plugged air gap. (See Care and Cleaning section.)Improper rack loading. (See Loading section,)Choose another cycle to give you longer washing time.Aluminum utensils often leave marks when they rub against dishes, Remove markswith a mild abrasive cleanser.Water may not be reaching the detergent cups. Move dishes that maybe blockingthe detergent cup.The dispenser cover may not be opening or may be blocked by improperly loadeditems. If you used a powder detergent, open the cups and remove any caked-ondetergent. If the cup still doesn’t open automatically, call for service.Detergent may be old. If the powder is hard or caked in the box, throw it away.The detergent may not be working well. Try another brand.18