GE GSD2900 Series Use And Care Manual

Also see for GSD2900 Series: Use and care guide

Contents

DOOR LATCH “ON” POSITION SELECTED CYCLE INDICATOR LIGHTSI -—-- —- --{ .1i‘--/---- ‘--- ---”-”--”-”-------:CYCLE SELECTIONS SOIL OP~ONS HEATING OPTIONS/POT. NORMAL SHORT CHINA RINSE HS~~ NORMAL LIGHTSCRUBBER WASH WASH CRYWAL &HOLO SOIL SOILOooto 900‘“~’ “OJ[-]00000000 00 maIStep 6. Select a drying option step 7. Start dishwasherl HEATED DRY on —Provides faster drvinp. l When vou’re readv to wash dishes. touch theCan be changed while cycle is running. ‘ “l HEATED DRY off (Energy Saver) —Shuts offheating unit. Dishes air-dry naturally. It t~es longer,but saves energy. You can prop door open about 3inches after motor stops to speed drying. Excellentfor overnight drying.l WASH HEAT BOOST. Use this option for bestperformance with heavily-soiled dishes. Whenselected, the wash cycle will be extended up to 30minutes while the dishwasher heats the water forgood washing and drying. This option is not availableon CHINA CRYSTAL, SHORT WASH or RINSE &HOLD cycles.STAR~ pad. Ther~ is a time delay between start-upand water fill so you will not hear any wash actionright away. Dishwasher will proceed through yourentire program and turn off automatically.To delay the start, touch START DELAY pad. TheSYSTEMS MONITOR will read”1 hrs delay.” Touchpad once again for each hour desired up to 14 hours.The machine will count down and start automaticallyat the correct time.NOTE: Don’t forget to put detergent in cup andclose cup. Do not use START DELAY with theRINSE & HOLD cycle.To change a cycle after washing starts, touch theCLEAR RESET pad to cancel cycle. After wateris pumped out and motor stops, you can reprogramand restart the dishwasher.5