49-60704-2 11INSTALLATION INSTRUCTIONSInstallation Instructions5 INSTALL THE ICEMAKER FILL CUPŶ ,QVWDOOWKHLFHPDNHUILOOFXS VLGHPRXQWHG into the icemaker as shown.8 INSTALL THE ICE BUCKETŶ Put the ice bucket LQSODFHXQGHUWKHicemaker.Ŷ Make sure the icemakerpower switch is set toOFF.10 KEEP THIS MANUALŶ The warranty for the icemaker is printed inthis manual. Keep this manual with yourRefrigerator Owner’s Manual.Ŷ The icemaker installation inside the freezer is nowcomplete. Continue to the Water Valve Assemblysection.9 ATTACH WARRANTY LABELŶ A label LVSURYLGHGZLWKWKLVNLWWRUHFRUGWKHdate of installation for warranty purposes. Apply itto the back of the refrigerator.7 MOUNT THE ICEMAKERŶ /LIWWKHLFHPDNHUVRWKHILOOtube extension fits in the fill cup opening & +DQJWKHLFHPDNHUon the two mounting screws $ Make sure:Ŷ The power cord is still firmly in the socket.Ŷ 7KHILOOWXEHH[WHQVLRQ LVVWLOOLQWKHILOOFXSRSHQLQJ &KHFNWKHUHDURIWKHUHIULJHUDWRUWRmake sure the fill tube has not been pushed out ofthe back of the refrigerator.)Ŷ 7KHLFHPDNHUPRXQWLQJVFUHZVDUHORFDWHGLQWKHuppermost position of the mounting slots.THEN TIGHTEN THEICEMAKER MOUNTINGSCREWS SECURELY.6 PLUG IN THE ICEMAKERŶ Holding the icemaker in place, insert the powercord plug into the socket, making sure that theprongs and holes are matched. Press the plugfirmly into the socket. Lock the plug in place byclipping the restraints onto each side of the plug.Make sure the restraints click into place.1310CA9