49-60704-2 15INSTALLATION INSTRUCTIONSInstallation Instructions5 INSTALL THE ICEMAKER FILL CUPŶ ,QVWDOOWKH icemaker fill cup VLGHPRXQWHG into the icemaker as shown.8 INSTALL THE ICE BUCKETŶ Put the ice bucket LQSODFHXQGHUWKHicemaker.Ŷ Make sure the icemakerpower switch is set toOFF.10 KEEP THIS MANUALŶ The warranty for the icemaker is printed inthis manual. Keep this manual with yourRefrigerator Owner’s Manual.Ŷ The icemaker installation inside the freezer is nowcomplete. Continue to the Water Valve Assemblysection.9 ATTACH WARRANTY LABELŶ A label LVSURYLGHGZLWKWKLVNLWWRUHFRUGWKHdate of installation for warranty purposes. Apply itto the back of the refrigerator.7 MOUNT THE ICEMAKERŶ /LIWWKHLFHPDNHUVRWKH fill tube RU ILWVin the fill cup opening ' +DQJWKHLFHPDNHURQthe two screws.Make sure:Ŷ The power cord is still firmly in the socket.Ŷ 7KHfill tube RU H[WHQGVLQWRWKHILOOFXSRSHQLQJDWWKHEDFNRIWKHLFHPDNHU &KHFNthe rear of the refrigerator to make sure the filltube has not been pushed out of the back of therefrigerator).Ŷ 7KHLFHPDNHUPRXQWLQJVFUHZVDUHORFDWHGLQWKHuppermost position of the mounting slots.THEN TIGHTEN THE ICEMAKER MOUNTINGSCREWS SECURELY.6 PLUG IN THE ICEMAKERŶ Holding the icemaker in place, insert the powercord plug into the socket on the side wall, makingsure that the prongs and holes are matched. Pressthe plug firmly into the socket. Lock the plug inplace by clipping the restraints onto each side ofthe plug. Make sure the restraints click into place.1394 SET POWER SWITCH TO OFFŶ Set the icemaker power switch to OFF. Leavethe power switch in the OFF position until therefrigerator is connected to the water supply toprevent premature operation.PowerSwitch$SSHDUDQFHPD\YDU\11 12Dor