GE J2BP85 Owner's Manual & Installation Instructions

Also see for J2BP85: Dimensions and installation information Installation and owner's instructions

Installation InstructionsELECTRICAL CONNECTIONS (CONT.)3B. Usage Situations where Appliance Power Cord willbe Disconnected Frequently.Do not use an adapter plug in these situations becausedisconnecting the power cord places undue strain onthe adapter and leads to eventual failure of the adapterground terminal. The customer should have the two-prong wall receptacle replaced with a three-prong(grounding) receptacle by a qualified electricianbefore using the appliance.The installation of appliances designed for mobilehome installation must conform with the ManufacturedHome Construction and Safety Standard, Title 24 CFR,Part 3280 (formerly the Federal Standard for MobileHome Construction and Safety, Title 24, HUD, Part280) or, when such standard is not applicable, theStandard for Manufactured Home Installations, latestedition (Manufactured Home Sites, Communities andSet-Ups), ANSI A225.1, latest edition, or with localcodes. In Canada, mobile home installation must bein accordance with the current CAN/CSA Z240/MHMobile Home Installation Code.Electric Disconnect Locate disconnect plug on the range back. Pinch sides of connector and pull out of range back.SEAL THE OPENINGS444ASSEMBLE SURFACE BURNERS(CONT.)Oval (Center) Burner Head/Cap AssemblyPlace the oval (center) head/cap assembly overthe electrode on the cooktop.CapsPlace the matching size caps onto the burnerbases or heads.Make sure that the heads (on some models) andcaps are replaced in the correct locations.GratesPlace the left, right and center grates on thecooktop. These grates are position specific.The undersides of the left and right grates aremarked “LEFT FRONT” and “RIGHT FRONT.”Place the middle grate with its bowed fronttoward the front of the range.CAUTION: Do not operate the burnerwithout all burner parts in place.DCB5ASSEMBLE SURFACE BURNERS5Burner Heads (on some models)Place burner heads over the electrodes onthe cooktop, in the correct locations accordingto their size. There is one small, one medium,one large and one extra large burner head.AElectrodeSlotFront of rangeOval head and capassemblyMedium capFront of rangeLarge capSmall capExtra largecapMake sure the slot in theburner head is positionedover the electrode.Left Front Right FrontCenterMake sure the slotin the burner headis positioned overthe electrode.Electrode SlotSeal any openings in the wall behind the range and in thefloor under the range when hookups are completed.Medium headFront of rangeLarge headSmall headExtra largehead