GE JCSP31 Use And Care Manual

Also see for JDP39: Installation instructions Use and care guide Owner's manual Owner's manual Owner's manual

GE JCSP31 Use And Care Manual Manual pdf 16 page image

16Control LockoutYour control will allow you to lock down the touchpads so they cannot be activated when pressed.1. Press BAKE and BROIL HI/LOat the same time for 2 secondsuntil the display shows “SF.”2. Press SELF CLEAN. Thedisplay will show “LOC OFF.”—Press SELF CLEAN again.The display will show “LOC.”3. Press START to activate the controllockout feature and leave the control set inthis special features mode.When this feature is on and the touch pads arepressed the control will beep and the display will show“LOC.”NOTE: The control lockout mode will not affect theclock or timer touch pads.STARTSELFCLEANBROILHI/LOBAKEFahrenheit or Centigrade Temperature SelectionYour oven control is set to use the Fahrenheittemperature selections but you may change thisto use the Centigrade selections.1. Press BAKE and BROIL HI/LOat the same time for 2 secondsuntil the display shows “SF.”2. Press BROIL HI/LO. Thedisplay will show “F”(Fahrenheit).3. Press BROIL HI/LO again. The displaywill show “C” (Centigrade).4. Press START.STARTBROILHI/LOBROILHI/LOBROILHI/LOBAKEChanging the Speed of the + or – PadsAs you use the + or – pads when setting a time ortemperature, you may notice the display changesslowly. This special feature allows you to change thespeed. To set the speed you prefer, follow the stepsbelow.1. Press BAKE and BROIL HI/LOat the same time for 2 secondsuntil the display shows “SF.”2. Press the + pad. The displaywill show you a set speedbetween 1 and 5.3. Press the + pad to increase the speed upto the number 5.—Press the – pad to decrease the speed downto the number 1.4. Press START to activate the settingand leave the control set in this specialfeatures mode.STARTBROILHI/LOBAKESPECIAL FEATURESOF YOUR OVEN CONTROL(continued)