GE JGS968 JGSP48 Owner's Manual
Also see for Profile JGS968 SERIES: Dimensions and installation informationTechnical service guideInstallation instructionsOwner's manualInstallation instructions
                                                | |
Contents
| 
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Cleaning the glass cooktop.Allow the cooktop to cool.Remove the burner grates and ventgrille.Use a single-edge razor blade scraperat approximately a 45° angle againstthe glass surface and scrape the soil.It will be necessary to apply pressureto the razor scraper in order toremove the residue.After scraping with the razor scraper,spread a few drops of CERAMABRYTE® Ceramic Cooktop Cleaner onthe entire burned residue area. Use theCERAMA BRYTE® Cleaning Pad toremove any remaining residue.For additional protection,after all residue has been removed,polish the entire surface withCERAMA BRYTE® Ceramic CooktopCleaner and a paper towel.Burned-On ResidueWARNING: DAMAGE to your glass surface mayoccur if you use scrub pads other than the padincluded with your cooktop.Allow the cooktop to cool.Remove the burner grates and ventgrille.Spread a few drops of CERAMABRYTE® Ceramic Cooktop Cleaner onthe entire burned residue area.Using the included CERAMA BRYTE®Cleaning Pad for Ceramic Cooktops,rub the residue area, applyingpressure as needed.If any residue remains, repeat thesteps listed above as needed.For additional protection, after allresidue has been removed, polish theentire surface with CERAMA BRYTE®Ceramic Cooktop Cleaner and a papertowel.The CERAMA BRYTE ® CeramicCooktop Scraper and allrecommended supplies areavailable through our Parts Center.See instructions under “To OrderParts” section on next page.NOTE: Do not use a dull ornicked blade.Heavy, Burned-On ResidueUse a CERAMA BRYTE ® CleaningPad for Ceramic Cooktops or aScotch-Brite® Multi-Purpose NoScratch blue scrub pad.Normal Daily Use CleaningONLY use CERAMA BRYTE® CeramicCooktop Cleaner on the glass cooktop.Other creams may not be as effective.To maintain and protect the surface of yourglass cooktop, follow these steps:Before using the cooktop for thefirst time, clean it with CERAMABRYTE® Ceramic Cooktop Cleaner.This helps protect the top and makescleanup easier.Daily use of CERAMA BRYTE® CeramicCooktop Cleaner will help keep thecooktop looking new.Remove the burner grates and ventgrille.Shake the cleaning cream well.Apply a few drops of CERAMA BRYTE®Ceramic Cooktop Cleaner directly tothe cooktop.Use a paper towel or CERAMA BRYTE®Cleaning Pad for Ceramic Cooktops toclean the entire cooktop surface.Use a dry cloth or paper towel toremove all cleaning residue. No needto rinse.NOTE: It is very important that you DO NOT heatthe cooktop until it has been cleaned thoroughly.Clean your cooktop aftereach spill. Use CERAMABRYTE ® Ceramic CooktopCleaner.Begin by locking the cooktop; see the RangeLockout section.Range Lockout (on some models)Depending on your modelDepending on your modelor36 |
Related manuals for GE Profile JGS968 SERIES
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine