GE JVM1630 Installation Instructions Manual

Also see for JVM1635: Owner's manual Owner's manual

GE JVM1630 Installation Instructions Manual Manual pdf 10 page image

10DETERMINING MOUNTING PLATE LOCATION UNDER YOUR CABINETCYour cabinets may have decorative trim that interfereswith the microwave oven installation. You may need toremove the decorative trim to install the microwave ovenproperly and to make it level.THE MICROWAVE OVEN MUST BE LEVEL.Use a level to make sure the cabinet bottom is level.If the cabinets have a front overhang, install themounting plate down the same distance as the frontoverhang depth. This will keep the microwave oven level.Measure the inside depth of the front overhang.Draw a horizontal line on the back wall an equaldistance below the cabinet bottom as the inside depthof the front overhang.For this type of installation with front overhang,align the mounting tabs with this horizontal line, nottouching the cabinet bottom as described in Step D.Plate Position – flat bottom cabinetPlate Position – cabinet with front overhangMounting Plate TabsTouching the CabinetBottomMounting Platewith Tabs BelowCabinet Bottomthe Same Distanceas the FrontOverhang DepthAt least 30″, up to 36″Plate Position – recessed cabinet bottomMounting PlateTabs Touching theBack Frame of theCabinet30″ to Cooktop30″ to Cooktop123Installation Instructions1” = 2.5 cm; 1’ = 0.3 m