GE JVM1630 Installation Instructions Manual

Also see for JVM1635: Owner's manual Owner's manual

GE JVM1630 Installation Instructions Manual Manual pdf 11 page image

11Installation InstructionsALIGNING THE MOUNTING PLATEDraw a vertical line on the wall at the center of the 30″wide space.Use the mounting plate as the template for the rear wall.Place the mounting plate on the wall, making sure thatthe tabs are touching the bottom of the cabinet orthe level line drawn in Step C for cabinets with frontoverhang. Line up the notch and center line onthe mounting plate to the center line on the wall.While holding the mounting plate with one hand, drawcircles on the wall at holes A, B, C, and D (see illustrationabove/actual plate marked with arrows). Four holesmust be used for mounting.NOTE: Holes C and D are inside area E. If neither C nor Dis in a stud, find a stud somewhere in area E and draw afifth circle to line up with the stud. It is important to useat least one wood screw mounted firmly in a studto support the weight of the microwave oven.Set the mounting plate aside.WARNING: Risk of electric shock. Can causeinjury or death. Take care to not drill into electrical wiringinside walls or cabinets.Drill holes on the circles. If there is a stud, drill a 3⁄16″ holefor wood screws. For holes that don’t line up with a stud,drill a 5⁄8″ hole for toggle bolts.NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.234Draw aVertical Lineon Wall fromCenter of TopCabinetArea EHole AHole BHole DNotchHole CDCAUTION:Wear gloves to avoid cuttingfingers on sharp edges.130”1” = 2.5 cm; 1’ = 0.3 m