GE NetworX NX-6 Installation And Startup

Also see for NetworX NX-6: User manual

Contents

Page 23LOCATION 51 AUTOTEST CONTROL 4 segments, numerical dataSegment 1 Program a "1" if the interval is to be in hours. Program a "0" if in days. Program a A2" tosuppress the daily test or a A3" to suppress the hourly test if any report has been sent.Segment 2 Program the Autotest interval from 1-255 hours/days.Segment 3 Program the Autotest report hour in 24-hour format (if the interval is in hours, this segment isignored).Segment 4 Program the Autotest report time, number of minutes after the hour.LOCATION 52 OPENING TIME 2 segments, numerical dataLocation 52 contains the time in 24 hour format the NX-6 enables codes designated as arm only after closing. This timeis only valid on those days programmed in location 54. Note: Opening time must be earlier than closing time forAuto Arm, Auxiliary Outputs, or Code Authorization to function properly.Segment 1 Program the hour of the opening time.Segment 2 Program the minutes after the hour of the opening time.LOCATION 53 CLOSING TIME/AUTOMATIC ARMING TIME 2 segments, numerical dataLocation 53 contains the time in 24-hour format the NX-6 disables the disarm capability for codes designated as arm onlyafter closing. This is also the time the Automatic Arming sequence will begin (if enabled in location 55). Note: Openingtime must be earlier than closing time for Auto Arm, Aux. Outputs, or Code Authorization to function properly.Segment 1 Program the hour of the closing / auto arm time.Segment 2 Program the minutes after the hour of the closing / auto arm time.LOCATION 54 DAYS OF WEEK EACH PARTITION IS OPEN 2 segments, feature selectionLocation 54 selects which days of the week each partition is open. On these days, Aarm only after close window@ codeswill be able to arm and disarm during open window. NOTE: If any partition is not programmed to be opened andis programmed to Auto-Arm (Location 55), the NX-6 will try to arm every 45 minutes for the duration of theclosed period. On days not selected here, Aarm only after close window@ codes will not disarm. Segment 1 is forpartition 1, and segment 2 is for partition 2. (See locations 52 and 53 for the opening and closing times for theopen days.)Segments 1- 2 â Open on Sunday.ã Open on Monday.ä Open on Tuesday.å Open on Wednesday.æ Open on Thursday.ç Open on Friday.è Open on Saturday.é Reserved.LOCATION 55 DAYS OF WEEK PARTITIONS WILL AUTO ARM 2 segments, feature selectionLocation 55 selects which days each partition will auto arm. Segment 1 is for partition 1, and segment 2 is for partition2. If a zone is faulted when the panel tries to auto arm, the zone will be bypassed.Segments 1- 2 â Auto Arming on Sunday.ã Auto Arming on Monday.ä Auto Arming on Tuesday.å Auto Arming on Wednesday.æ Auto Arming on Thursday.ç Auto Arming on Friday.è Auto Arming on Saturday.é Reserved.