GE NetworX NX-6V2 Installation And Startup

Also see for NetworX NX-6V2: User manual Installation instructions

Contents

NX-6V2 Control 45XVIII. APPENDIX 3EXPANDER NUMBERS FOR REPORTING EXPANDER TROUBLEThe tables below list the device numbers that will be reported for trouble conditions.Device Device # reportedNX-6V2 Control Panel 0 See page 43 for possible report codes.NX-534E Two Way Listen-In 64NX-540E “Operator” 40NX-591E Cellemetry Interface 76KEYPADS HARDWIRE EXPANDER (NX-216E)KEYPAD PART 1 PART 2 Starting zone number Expander # reported1 192 193 Zone 09 (All switches off) 222 200 201 Zone 09 (Switch 1 on) 233 208 209 Zone 17 (Switch 2 on) 164 216 217 Zone 25 (Switches 1 & 2 on) 175 224 225 Zone 33 (Switch 3 on) 186 232 233 Zone 41 (Switches 1 & 3 on) 197 240 2418 248 249REMOTE POWER SUPPLY (NX-320E) WIRELESS RECEIVER (NX-448E)Switch Setting Address Switch Setting Expander # reportedAll switches off 84 All switches off 35Switch 1 on 85 Switch 1 on 36Switch 2 on 86 Switch 2 on 37Switch 1 & 2 on 87 Switches 1 & 2 on 38Switch 3 on 88 Switch 3 on 39Switch 1 & 3 on 89 Switches 1 & 3 on 32Switch 2 & 3 on 90 Switches 2 & 3 on 33Switches 1, 2, & 3 on 91 Switch 1, 2 & 3 on 34OUTPUT MODULE (NX-508E)Switch Setting Address Switch Setting Address Switch Setting AddressSwitch 1 & 2 on 24 Switch 2 & 3 on 27 Switch 1 on 30Switch 3 on 25 Switch 1,2,&3 on 28 Switch 2 on 31Switch 1 & 3 on 26 All switches off 29XIX. APPENDIX 4USER ID OR ZONE ID HEX DIGIT FOR 4+2 FORMATSThe following appendix applies only to slow formats (locations 56- 83 lower digit). The digit programmed in the locations will besent as the upper HEX digit in place of the alarm event code. The zone ID or user ID will always be reported as the lower HEX digit (1-F) as shown in the chart below. For example, if the zone ID or user ID is 15, the 4+2 lower digit will be “F”. Use the chart shown belowfor convenience." If Segment 2 is left as “0” (unprogrammed), it will follow the Segment 1 selection. If Segment 1 is left as “0” and the feature isenabled in Location 23, the NX-6V2 will report “A”.ZONE ZONE ZONE ZONE HEXUSER HEX USER HEX USER HEX USER1 1 11 B 21 6 31 12 2 12 C 22 7 32 23 3 13 D 23 8 33 34 4 14 E 24 9 34 45 5 15 F 25 A 35 56 6 16 1 26 B 36 67 7 17 2 27 C 37 78 8 18 3 28 D 38 89 9 19 4 29 E 39 910 A 20 5 30 F 40 A