GE PFE28 Owner's Manual And Installation Instructions

Also see for Profile Series: Manual Quick Use & Care Owner's manual Owner's manual Installation instructions

GE PFE28 Owner's Manual And Installation Instructions Manual pdf 21 page image

21TOOLS YOU MAY NEEDInstallation RefrigeratorInstructions GE and GE Profile™ modelsQuestions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.comIn Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.caBEFORE YOU BEGINRead these instructions completely and carefully.WARNING Tip Over Hazard.Built-in style models (model PYE, CYE, GYE, PWE,CWE, and ZWE) are top heavy, especially with any doorsopen. These models must be secured with the anti-tipfloor bracket to prevent tipping forward, which couldresult in death or serious injury. Read and follow the entireinstallation instructions for installing the anti-tip floorbracket packed with your refrigerator.• IMPORTANT ³ Observe all governing codes andordinances. Save these instructions for local inspector’s use.• Note to Installer – Be sure to leave these instructions withthe Consumer.• Note to Consumer – Keep these instructions for futurereference.• Skill level – Installation of this appliance requires basicmechanical skills.• Completion time – Refrigerator Installation can varyWater Line Installation 30 minutes• Proper installation is the responsibility of the installer.• Product failure due to improper installation is not coveredunder the Warranty.PREPARATIONMOVING THE REFRIGERATOR INDOORSIf the refrigerator will not fit through a doorway,the refrigerator door and freezer drawer can be removed.• To remove the refrigerator door, see the Installingthe Refrigerator section.• To remove the freezer drawer, see the Removingthe Freezer Drawer section.WATER SUPPLY TO THE ICE MAKER AND DISPENSERIf the refrigerator has an ice maker, it will have to beconnected to a cold water line. A GE water supply kit(containing tubing, shutoff valve, fittings and instructions)is available at extra cost from your dealer, by visitingour website at GEAppliances.com (in Canada at www.GEAppliances.ca) or from Parts and Accessories, 800.626.2002(in Canada 1.800.661.1616).Adjustable Wrench1/4” Outer DiameterCompression Nutand Ferrule (sleeve) Phillips-Head ScrewdriverȒμ Socket Ratchet/Driver1/8”, 3/32”, 1/4” & 5/32”Allen WrenchesPencil1/8” Drill Bit andElectric or Hand DrillTape Measure1/4” Nut Driver5/16” Nut DriverPliersLevelFlat-Head ScrewdriverTorx T20, T25