GE PFE28 Owner's Manual And Installation Instructions

Also see for Profile Series: Manual Quick Use & Care Owner's manual Owner's manual Installation instructions

GE PFE28 Owner's Manual And Installation Instructions Manual pdf 24 page image

24Installation InstructionsREMOVE THE REFRIGERATOR DOORS (cont)Disconnect the water line from the back of the unit bypressing down on the dark grey collar while pulling upon the water line.Pull water line through case conduit from the top tofree the line for door removal. The water line is morethan 4’ long and may need to be taped to Door foraccessibility when reinstalling.Using a 3/8” socket ratchet/driver, remove the screwssecuring the top hinge to the cabinet,then lift the hinge straight up to free the hinge pinfrom the location in the top of the door.CAUTION Lifting Hazard.Single person lift could cause injury. Use assistancewhen handling, moving or lifting the refrigerator doors.Note: when removing door, to prevent damage to doorand electronics, carefully place the door in a properlocation.Note: The lower door hinge pin and hinge are keyed andmust be matched correctly for the door to self closeproperly. Please follow the directions carefully.REMOVE THE REFRIGERATOR DOORSA Securely tape the door shut with masking tape or havea second person support the door.B Start with left-hand door first: Remove the hinge coveron top of the left refrigerator door by removing all hexscrews and pulling it up. Do the same for theright-hand door and the middle cover.C Disconnect both electrical connectors at the top cover.Remove the 1/4” hex head screw to disconnect theground wire from the hinge.Remove the 1/4” hex head screw to remove the strainrelief from the water line.INSTALLING THE REFRIGERATOR (cont.)3 3EDGroundscrewStrainReliefHingeCover Y or StraightConnector