GE Profile DPVH890EJ Technical Service Manual

Also see for Profile DPVH890EJ: Owner's manual and installation instructions Dimensions and installation information Installation information

– 39 –TroubleshootingThe dryer control has a service test mode that can be utilized by the service technician in order to testcritical components and to access error codes. This test mode will help the service technician to quicklyidentify failed or improperly operating dryer components.To enter the test mode: To exit the test mode:With the power connected but the power button off:1. Press the MY CYCLE button.2. Press the DELAY START button.3. Press the MY CYCLE button.4. Press the DELAY START button.Upon entering the service mode, the control shall bein test selection mode and display the list of tests onthe vacuum fluorescent display (VFD). Scroll throughthe list of tests by using the up or down cursorarrows. Selection shall be represented by bold text.Once the desired test is highlighted, press ENTER tobegin the test.During a test, press POWER to terminate it and goback to test selection mode.Press the POWER button 3 times during the testselection mode.Note: A dryer left in the test mode will exit the testmode after a period of 30 minutes.Service Test Mode(Continued Next Page)