Installation PreparationPARTS SUPPLIED: Two #8 Phillips flat head wood screws, 5/8" long tosecure dishwasher to underside of countertop orsides of cabinetry. (Taped to top or side of dishwasher.) Side and top trim pieces Trim Panel Accessory Kit (not shown).Model PDW9700 only Drain Hose and Hose ClampMATERIALS YOU WILL NEED : Ferrule, compression nut and 90° Elbow (3/8"NPT externalthread on one end, opposite end sized to fit water supply) Thread seal tape UL Listed wire nuts (3)Materials For New Installations Only: Air gap for drain hose, if required Waste tee for house plumbing, if applicable Electrical cable or power cord, if applicable Screw type hose clamps Strain relief for electrical connection. Hand shut-off valve Water line 3/8" min. copper Coupler for extending drain line, if applicableTOOLS YOU WILL NEED: Phillips head screwdriver 5/16" and 1/4" nutdriver 6" Adjustable wrench Level Carpenters square Measuring tape Safety glasses Flashlight Bucket to catch water when flushing the line 15/16" socket (optional for skid removal) GlovesFor New Installations Only: Tubing cutter Drill and appropriate bits Hole saw set90° Elbow,Ferrule andCompression NutWire Nuts (3)Waste TeeElectrical Cable(or Power Cord, if applicable) Hot Water lineScrew TypeHose ClampsCouplerHandShut-OffValveTrim Pieces(some models)2 Wood ScrewsHole Saw SetMeasuring TapeTubing CutterDrill and BitsPhillipsHeadScrewdriver15/16" Socket1/4"and 5/16"NutdriverSafety Glasses6" AdjustableWrenchBucketFlashlightGlovesCarpentersSquareLevel2ThreadSeal TapeAir GapStrain ReliefDrain Hose Hose Clamp