The slide-out spillproof shelf allows you toreach items stored behind others. The specialedges are designed to help prevent spills fromdripping to lower shelves.To remove: Slide the shelf out until it reachesthe stop, then press down on the tab and slidethe shelf straight out.To replace or relocate: Line the shelf up withthe supports and slide it into place. The shelfcan be repositioned when the door is at 90° ormore. To reposition the shelf, slide the shelfpast the stops and angle downward. Slide shelfdown to the desired position, line up with thesupports and slide into place.NOTE: Make sure you push the shelves all the wayback in before you close the door.13Fresh foodcompartmentdoor bins andfreezer doortilt-out binsLarge BinsThe larger fresh food compartment door binsand freezer tilt-out door bins are adjustable.To remove: Lift the front of the bin straightup, then lift up and out.To replace or relocate: Engage the back sideof the bin in the molded supports of the door.Then push down on the front of the bin.Bin will lock in place.Small BinsTo remove: Lift the front of the bin straightup, then out.To replace: Position the bin above therectangular molded supports on the door.Then slide the bin down onto the supportto lock it in place.The snugger helps prevent tipping, spillingor sliding of small items stored on the doorshelf. Place a finger on either side of thesnugger near the rear and move it backand forth to fit your needs.Press tab and pull shelfforward to removeFresh food compartment door binFreezer tilt-out binSnuggerShelves and BinsStainless Steel RefrigeratorSlide-outspillproofshelfDo not blockTop freezer binwCAUTION:Be careful whenplacing items inthe top bin. Makesure that itemsdo not block or fallinto the ice chute.wMISE ENGARDE : Soyezprudents lorsquevous placez desarticles dans le bacsupérieur. Assurez-vous qu’aucunobjet ne bloqueou tombe dans lachute à glaçons.