GE SG SERIES 10 Operating Manual

Contents

g GEOPM_SGS_USM_10K_40K_0US_V010.doc 27/88 Operating Manual SG Series 10, 20, 30 & 40 kVA6.3 PARAMETERSThe parameters mode is entered any time the parameters button is pressed.The LCD will display a series of screens containing the user parameters, accessible withoutpassword protection.The buttons perform the following functions:metering Abandon parameters mode and enter metering mode.alarms Abandon parameters mode and enter alarms mode.parameters Scroll forward to the next screen.+ Scroll forward to the next screen.– Select from the current screen the parameter to edit.ok Start the editing for the currently selected parameter.During parameters mode there is no means to perform scroll back on thedisplay.Example of operation within parameters mode:Purpose: to correct a wrong telephone number previously stored in Tel2.1 – entering parameters mode (parameters). The first screen is displayed.2 – scroll to the next screen (+). The second screen is displayed.3 – scroll to the next screen (+). The third screen is displayed.4 – move the selection (underscore cursor) to the next parameter in this page (-).5 – move the selection to the next parameter in page (-).6 – enter Edit mode for the currently selected parameter (ok).DATE AND TIMED M YDate: 01.10.2002Time: 12:45:07metering1 alarmsparameters+–okPROTOCOL SETUPModem enabled=NInit=BEQV1X3&D0S0=2Alarm= N Delay=22smetering2 alarmsparameters+–ok