GE SG SERIES 10 Operating Manual

Contents

g GEOPM_SGS_USM_10K_40K_0US_V010.doc 32/88 Operating Manual SG Series 10, 20, 30 & 40 kVA6.5 USER PARAMETERSPressing the Parameters button displays a series of screens containing the user parameterson the LCD panel.This first parameter level in not protected by password, therefore the user can freely adaptthese parameters to their needs.The meaning of the user parameters and their use is described below (buttons performance isdescribed to Section 6.3).1. Date and Time set-upDATE AND TIMED M YDate: 01.09.2002Time: 19:44:07meteringalarmsparameters+–okDate You can adjust the date of the real time clock existing in the UPS by the means of thisparameter.The value you enter is thoroughly checked to be a correct date in the format“dd.mm.yy”.Time You can adjust the time of the real time clock existing in the UPS by means of thisparameter.The value you enter is thoroughly checked to be a correct time in the format“hh.mm.ss”. The time is specified in 24-hour format.2. Protocol Set-upPR O TO C O L SE TU PM odem enabled= NInit= B EQ V 1X 3&D 0S 0=2Alarm =N D elay=22secm eteringalarm sparam eters+–okModem enabled You can enable/disable with Y/N the remote control through modem callsby using this parameter.Init This parameter presents the modem initialization string.It can be 39 characters long.When editing this parameter the UPS considers that a blank characterterminates the string.If no blank character is found then all 39 characters are used.Alarm This Y/N parameter controls the automatic events signaling throughmodem.If this parameter is set to Yes the UPS itself will call the remote locationwhen a new event occurs.Delay This parameter controls the delay between the occurrence of a new eventand the modem dialing.It is useful because since the events typically do not occur isolated but incertain sequences, you can eliminate the need for multiple dial-outs forsuch a sequence of events.