GE TLE 160 User Manual

Also see for TLE Scalable 150: Quick start guide

Contents

Critical PowerModifications reserved Page 11/91GE_UPS_USM_TLE_SUL_M16_M50_2bU_V010.docx User Manual TLE Series 160 - 500 UL S2B3 INTRODUCTIONThe TLE Series 160 - 500 Uninterruptible Power Supply (UPS) provides the energy supply for criticalloads which need a reliable, continuous free from voltage disturbances and frequency fluctuationssupply.In case the power provided by the Utility Fails, or exceeds the permitted tolerances, the power to supplythe Load is provided by the Battery for the specified time at the rated Load (or longer at a reduced Load)or until the Utility power returns.TLE Series 160 - 500 is a truly VFI double conversion Uninterruptible Power Supply(UPS), equipped with automatic bypass, where the Load is normally supplied by theInverter.If the Inverter is not able to supply the required Output Voltage, or when overload orshort-circuit on the output occur, the Load is instantly transferred to the Utility viathe Automatic Bypass.The UPS automatically returns to normal mode when the failure condition isrestored.TLE Series 160 - 500 can be configured, if chosen, for the eBoost™ Operation Mode(Option - High efficiency: up to 99% / Fast power transfer: <2ms) permittingmaximum energy saving.KEY FEATURES:More Critical equipment supportedRated at 1 Power Factor, TLE Series 160 - 500 delivers more real power than other UPS in the market.With today’s trend toward power factor corrected loads, TLE Series 160 - 500 can support more totalLoad than any other UPS available, allowing you to support a greater number of today’s enterprisecomputing Power Factor Corrected (PFC) equipment.High EfficiencyThanks to type Advanced Neutral Point Clamped three level IGBT technology, TLE Series 160 - 500guarantees a high overall performance.Intelligent Energy Management (IEM) combined with RPA, results in the most cost efficient and reliableUPS solution in the industry.Fully digitalDigital Signal Processor (DSP), Flash memory and Advanced Neutral Point Clamped are the technologycorner stones of a new age of power quality and power reliability.RPA™ - Redundant Parallel Architecture™ Parallel SystemGE provides a unique technology called Redundant Parallel Architecture™ (RPA™) that can parallelUninterruptible Power Supply (UPS) modules with true redundancy.With RPA™, there is no need for external electronics or switches to control the UPS modules in theparallel system.One of the UPS modules in the system arbitrarily takes a leadership role, while the other UPS moduleshave access to all control parameters.If one UPS fails to operate, the load is automatically redistributed among the others.If the lead UPS fails to operate then a different UPS automatically takes on the leadership role.The RPA™ systems are designed to have no single points of failure, ensuring the highest level of powerprotection for critical loads.Extremely flexibleTailor made power protection to meet your individual installation requirements; TLE Series 160 - 500offers various options like EMC filter and our comprehensive software for mission control and dataprotection to cover all your application needs.