GE TLE 160 User Manual

Also see for TLE Scalable 150: Quick start guide

Contents

Critical PowerModifications reserved Page 32/91GE_UPS_USM_TLE_SUL_M16_M50_2bU_V010.docx User Manual TLE Series 160 - 500 UL S2BLOAD SCREENVoltage L1 / L2 / L3Output voltage PHASE/NEUTRAL foreach phase.Current L1 / L2 / L3The output current as RMS values foreach phase.Percent load L1 / L2 / L3The output Load as percentage for eachphase.Active power Load active power (kW) for each phase.Apparent power Load apparent power (kVA) for each phase.Power factor Load power factor: + inductive load / - capacitive loadStatus Source of the power supplied to the Load.Inverter operating time Total operating time for the Inverter (in hours).Apparent power Total apparent Load power (kVA).UPS operation time Total operating time for the UPS (in hours).Active Power Total effective Load power (kW).eBoost operation time Total operating time for the UPS in eBoost™ Operation Mode (in hours).This counter is displayed only when eBoost™ Operation Mode is available(option).Overload counter Total number of detected output overloads.IEMi operation time Total operating time for the UPS in IEMi Operation Mode (in hours).This counter is displayed only when IEMi Operation Mode is available (option).BOOSTER SCREENBattery voltageThe battery voltage.Battery currentThe battery current (negative valuescorrespond to the discharge of thebattery).Voltage DC-link 1DC-link 1 voltage.Voltage DC-link 2 DC-link 2 voltage.Status Booster status (Off / Booster / Charger).Temperature Temperature of the 4th leg’s bridge.Temperature a Booster temperature (lower module).Temperature b Booster temperature (upper module).