GE Multilin T60 Transformer Protection System 5-355 SETTINGS 5.2 PRODUCT SETUP5The breaker configuration settings are shown below. Changes to these values will not take effect until the UR is restarted:PATH: SETTINGS PRODUCT SETUP COMMUNICATIONS IEC 61850 PROTOCOL XCBR CONFIGURATIONThe CLEAR XCBR1 OpCnt setting represents the breaker operating counter. As breakers operate by opening and closing, theXCBR operating counter status attribute (OpCnt) increments with every operation. Frequent breaker operation may resultin very large OpCnt values over time. This setting allows the OpCnt to be reset to “0” for XCBR1. XCBR CONFIGURATIONXCBR1 ST.LOC OPERANDOffRange: FlexLogic™ operandMESSAGE XCBR2 ST.LOC OPERANDOffRange: FlexLogic™ operandMESSAGE XCBR3 ST.LOC OPERANDOffRange: FlexLogic™ operand↓MESSAGE XCBR6 ST.LOC OPERANDOffRange: FlexLogic™ operandMESSAGE CLEAR XCBR1 OpCnt:NoRange: No, YesMESSAGE CLEAR XCBR2 OpCnt:NoRange: No, YesMESSAGE CLEAR XCBR3 OpCnt:NoRange: No, Yes↓MESSAGE CLEAR XCBR6 OpCnt:NoRange: No, Yes
