Gaggenau BOP 220 Instruction Manual

Gaggenau BOP 220 Instruction Manual Manual pdf 16 page image

16End of cooking timeYou can delay the cooking time end to a later time.Example: it is 14:00. The dish requires a cooking time of40 minutes. You want it to be ready at 15:30.Enter the cooking time and delay the cooking time enduntil 15:30. The electronics system calculates the starttime. The appliance starts automatically at 14:50 andswitches off at 15:30.Bear in mind that food which spoils easily should not beleft in the cooking compartment for too long.Delaying the cooking time endYou have set the heating mode, temperature andcooking time.1 Touch the M symbol.2 Use C to select the 5 "Cooking time end"function.3 Set the desired cooking time end using the rotaryselector.4 Press I to start.The appliance switches to standby. The heating mode,temperature, cooking time and cooking time end appearin the display. The appliance starts at the calculatedtime and switches off automatically when the cookingtime has elapsed.Note: If the 6 symbol flashes: You have not set thecooking time. Always set the cooking time first.Once the cooking time has elapsed, the applianceswitches off. The 5 symbol flashes and an audiblesignal sounds. The signal stops early if you touch the ™symbol, open the appliance door, or set the functionselector to 0.To change the cooking time end:Call up the timer menu. Use C to select the 5"Cooking time end" function. Set the desired cookingtime end using the rotary selector. Press I to start.To terminate the whole procedure:Set the function selector to 0.Long-term timerWith this function, the appliance maintains atemperature between 50 und 230°C with the "Hot air"heating function.You can keep food warm for up to 74 hours withouthaving to switch the appliance on or off.Bear in mind that food which spoils easily should not beleft in the oven for too long.Note: You must set the long-term timer to "available" inthe basic settings (refer to the Basic settings section).Setting the long-term timer1 Set the function selector to ž.2 Touch the / symbol.The default value 24 hrs at 85 °C appears in thedisplay. Press I to start–or–Change the cooking time, the cooking time end, theswitch-off date and the temperature.3 Changing the cooking time 6:Touch the $ symbol. Set the required cookingtime using the rotary selector.4 Changing the cooking time end 5:Touch the C symbol. Set the required cookingtime end using the rotary selector.5 Changing the switch-off date q:Touch the C symbol. Set the required switch-offdate with the rotary selector. Confirm with ™.6 Changing the temperature:Set the required temperature with the rotaryselector.7 Press I to start.&RRNLQJWLPHHQG/RQJWHUPWLPHU