Gaggenau BX 481 Instruction Manual

Also see for BX 480: Instruction manual Installation instructions Use and care manual Use and care manual

Gaggenau BX 481 Instruction Manual Manual pdf 24 page image

24Basic settingsYour appliance can be individually adjusted in thebasic settings.1 Turn the function selector to S.2 Select "Basic settings" using the rotary selector.3 Touch the ™ symbol.4 Turn the rotary selector to select the requiredbasic setting.5 Touch the % symbol.6 Set the basic setting using the rotary selector.7 Save with ™ or cancel with ' and exit the currentbasic setting.8 Turn the function selector to 0 to exit the basicsettings menu.The changes are saved.Basic setting Permitted settings ExplanationBrightness Level 1, 2, 3, 4, 5*, 6, 7, 8 Sets the display brightnessStandby screen On*/Off- Clock- Clock + GAGGENAU logo*- Date- Date + GAGGENAU logo- Clock + date- Clock + date + GAGGENAU logoAppearance of the standby screen.Off: No display. Use this setting to reducethe standby consumption of your appliance.On: Several displays can be set, confirm"On" with ™ and use the rotary selector toselect the desired display.The selection is displayed.Display screen Reduced* / Standard If set to Reduced, after a brief period onlythe most important information is shown.Touch field colour Grey* / White Selects the colour of the symbols on thetouch fieldsTouch field tone Tone 1* / Tone 2 / Off Selects an audible signal for when a touchfield is touchedTouch field tone vol-umeLevel 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the touch field tonePreheating speed/sig-nalHeating-up with audible signal*Rapid heating with audible signalHeating-up without audible signalRapid heating without audible signalThe signal tone sounds when the cookingcompartment has heated up to the requiredtemperature. With rapid heating, therequired temperature is reached particularlyquickly.Signal volume Level 1, 2, 3, 4, 5*, 6, 7, 8 Sets the volume of the audible signalTime format 24 h* / AM/PM Display the clock in 24 or 12 hour formatTime Current time Setting the clockClock change Manual* / Automatic Automatically changes the clock to daylight-savings time. If automatic: Setting themonth, day and week for when the timeshould be changed over. To be set for bothsummer and winter time.Date format D.M.Y*D/M/YY/M/DSets the date format