8Colours and displayColoursThe different colours are used to guide the user in therelevant setting situations.DisplayThe appearance of the symbols, values or the entiredisplay changes depending on the situation.Additional information ( and )By touching the ( symbol, you can call up additionalinformation.The ) symbol appears for important information andindicates that an action is required. Importantinformation on safety and operation mode are alsointermittently shown automatically. These messagesdisappear automatically after several seconds or mustbe confirmed with ™.Before starting, you are shown information, forexample, on the type of heating which has been set.This allows you to check if the current setting issuitable for your meal.During operation, you are shown information, forexample, on the elapsed and remaining time and/or onthe current cooking compartment temperature.Note: Once the oven has heated up, slight deviationsin temperature are normal during continuousoperation.Cooling fanYour appliance has a cooling fan. The cooling fanswitches on during operation. Depending on theappliance version, the hot air escapes above or underthe door.After removing cooked food, keep the door closeduntil the appliance cools down. The appliance doormust not be left ajar, as adjoining kitchen furnituremay be damaged. The cooling fan continues to run fora certain time after operation and then switches offautomatically.Caution! Do not cover the ventilation slots.Otherwise, the appliance will overheat.Orange Initial settingsMain functionsBlue Basic settingsCleaningWhite Values which can be setZoom The setting which is currently beingchanged is displayed in an enlarged for-mat.A cooking time that is coming to an endis shown in an enlarged format shortlybefore running out (e.g. the last 60 sec-onds of the timer).Reduced display After a short time, the display is reducedand only the most important informationis displayed. This function is preset andcan be changed in the basic settings.