Gaggenau RF 222 User Manual

Also see for RF 222: User manual User manual

Gaggenau RF 222 User Manual Manual pdf 22 page image

22en Installation and connectionBefore using your appliance for thefirst time1 Remove leaflets, adhesive tape and protective film.2 Clean the appliance.~ "Cleaning" on page 29Electrical connectionCaution!Do not connect the appliance to electronic energy saverplugs.Note: You can connect the appliance to mains-controlled and sine-controlled inverters.Mains-controlled inverters are used for photovoltaicsystems which are connected directly to the nationalgrid. Sine-controlled inverters must be used for isolatedapplications. Isolated applications, e.g. on ships or inmountain lodges, which are not connected directly tothe national grid.1 After installing the appliance, wait at least 1 hourbefore connecting it to prevent damaging thecompressor.2 Connect the appliance via a correctly installedsocket.The socket must comply with the following data:Outside Europe: Check whether the indicatedcurrent type of the appliance corresponds with thevalues of your power supply. Appliancespecifications are on the rating plate.~ "Getting to know your appliance"on page 233 Connect the appliance to a socket near theappliance.The socket must be freely accessible even after theappliance has been installed.Socket with 220 V ... 240 VConductor 50 HzFuse 10 A ... 16 A