Gaggia SYILX014MENGRC Operating Instructions Manual

ENGLISH• 36 •Now press “∧∧∧∧∧” or “∨∨∨∨∨”to selectRINSINGONRINSINGOFFand store the selection by pressing “ENT”.We recommend selecting:RINSINGONWATER HARDNESSThe hardness of tap water may vary from regionto region. For this reason, the appliance maybe adjusted according to the degree of hardnessof the water in the place it will be used in;hardness is measured on a scale of 1 to 4.The appliance is already programmed foran average value (hardness 3). Theappliance setting should be adjustedaccording to the actual hardness of the water,which can be measured using the test stripprovided.Briefly dip (1 second) the test strip providedin water and shake it gently. After one mi-nute you can read the test results on thestrip.• After accessing the programming mode press“∧∧∧∧∧” or “∨∨∨∨∨” to select the function:WATER HARDN.and enable it by pressing “ENT”.• The display will show:WATER HARDN.HARDNESS 3• Check the test strip previously immersed inwater to see how many squares have changedcolour.• Press “∧∧∧∧∧” or “∨∨∨∨∨” to select the correct waterhardness (e.g. 2 squares = Hardness 2) andmemorise it by pressing “ENT”.Caution: descale the appliance whenthe max water hardness level is reached.The display will show the message:DESCALINGREADY FOR USECUP HEATERCUP HEATERThis function is used to activate the device forwarming up cups on the machine.• In the programming mode, press ∧∧∧∧∧” or “∨∨∨∨∨”to select the functionCUP HEATERand enable it by pressing “ENT”.• At this point the machine will display theindication:CUP HEATERON or CUP HEATEROFFand you must choose between on and off bypressing “∧∧∧∧∧” or “∨∨∨∨∨”. Press “ENT” to confirmyour choice.TEMPERATUREThis function allows you to adjust the water tem-perature to obtain hotter or less hot coffee(Minimum, low, medium, high and maximum).• After accessing the programming mode press“∧∧∧∧∧” or “∨∨∨∨∨” to select the function:TEMPERATUREthen enable it by pressing “ENT”.The display will show, for example:TEMPERATUREMEDIUM• Press “∧∧∧∧∧” or “∨∨∨∨∨” to select the desired tem-perature and memorise it by pressing “ENT”.PRE-BREWINGIn the pre-brewing process the coffee is slightlymoistened before actual brewing. This brings out